LCDINT

LCD_INT -- LCD controller

Uses PIR1,LVDIF, PIE1,LVDIE Registers and Control Bits.
DT's Interrupts MUST be used with PicBasic Pro and MPASM.


The following block of instructions will establish the interrupt used and the PBP label (your ISR) to jump to once interrupt occurs. Remember; all PBP labels or variables used inside ASM code blocks must be preceded by the underscore,( _GetData). All instruction to the interrupt processor should be in ASM and preceded by the @ symbol and to the far left column of the editor if not included in other ASM code blocks.
Example:
@ INT_DISABLE LCD_INT

ASM

 INT_LIST     macro     ;IntSource      Label,    Type,    ResetFlag?
            INT_Handler  LCD_INT     _GetData   PBP       Yes
            endm
            INT_CREAT             ;Creates the interrupt processor
            INT_ENABLE   LCD_INT  ;enables LCD interrupts

ENDASM

Command functions:
INT_CREATE ;Creates the interrupt processor
INT_ENABLE LCD_INT – enable LCD interrupt.
INT_DISABLE LCD_INT– disable LCD interrupt.
INT_CLEAR LCD_INT – clear flags
INT_RETURN ---------- To restore and return to the program where interrupt was made.

<< LVD_INT | 14-bit sources | USB_INT >>