InterruptSources

Available Interrupt Sources 16-bit

 INT_INT?  -- INT External, same as INT0_INT
 INT0_INT -- INT0 External Interrupt
 INT1_INT -- INT1 External Interrupt
 INT2_INT -- INT2 External Interrupt
 INT3_INT -- INT3 External Interrupt
 RBC_INT  -- RB Port Change
 TMR0_INT -- TMR0 Overflow
 TMR1_INT -- TMR1 Overflow
 TMR2_INT -- TMR2 to PR2 Match
 TMR3_INT -- TMR3 Overflow
 TMR4_INT -- TMR4 Overflow
 TX_INT   -- USART Transmit
 TX1_INT  -- USART1 Transmit
 TX2_INT  -- USART2 Transmit
 RX_INT   -- USART Receive
 RX1_INT  -- USART1 Receive
 RX2_INT  -- USART2 Receive
 CMP_INT  -- Comparator
 EE_INT   -- EEPROM/FLASH Write Operation
 BUS_INT  -- Bus Collision
 LVD_INT  -- Low Voltage Detect
 HLVD_INT -- High/Low Voltage Detect
 PSP_INT  -- Parallel Slave Port Read/Write
 AD_INT   -- A/D Converter
 SSP_INT  -- Master Synchronous Serial Port
 CCP1_INT -- CCP1 Interrupt
 CCP2_INT -- CCP2 Interrupt
 CCP3_INT -- CCP3 Interrupt
 CCP4_INT -- CCP4 Interrupt
 CCP5_INT -- CCP5 Interrupt
 USB_INT  -- USB Interrupt
 OSC_INT  -- Oscillator Fail

               Added in Version 3.2 

 CMP0_INT  -- Comparator 0 - 18F1230/1330
 CMP1_INT  -- Comparator 1
 CMP2_INT  -- Comparator 2
 SPP_INT   -- Streaming Parallel Port
 BUS1_INT  -- Bus 1 Collision
 BUS2_INT  -- Bus 2 Collision
 ECCP1_INT -- ECCP1
 LCD_INT   -- LCD Driver
 PMP_INT   -- Parallel Master Port
 SSP1_INT  -- Synchronous Serial Port 1
 SSP2_INT  -- Synchronous Serial Port 2
 TMR5_INT    -- Timer 5
 PT_INT      -- PWM Time Base
 IC1IF_INT   -- Motion Feedback
 IC2QEIF_INT -- Motion Feedback
 IC3DRIF_INT -- Motion Feedback

USB Module

 USB_INT       -- USB Interrupt (funnel)
 USB_ACTV_INT  -- Bus Activity Detect
 USB_ERR_INT   -- USB Error INT (funnel)
 USB_RST_INT   -- USB Reset
 USB_IDLE_INT  -- Idle Detect
 USB_STALL_INT -- A STALL Handshake
 USB_TRN_INT   -- Transaction Complete
 USB_SOF_INT   -- START-OF-FRAME Token

USB ERROR Flags

 USB_BTO_INT   -- Bus Turnaround Time-out
 USB_BTS_INT   -- Bit Stuff Error
 USB_CRC16_INT -- CRC16 Failure
 USB_CRC5_INT  -- CRC5 Host Error
 USB_DFN8_INT  -- Data Field Size Error
 USB_PID_INT   -- PID Check Failure

Ethernet Module

 ETH_INT       -- Ethernet Int (funnel)
 ETH_DMA_INT   -- DMA Interrupt
 ETH_LINK_INT  -- Link Status Change
 ETH_PKT_INT   -- Receive Packet Pending
 ETH_RXER_INT  -- Receive Error
 ETH_TXER_INT  -- Transmit Error
 ETH_TX_INT    -- Transmit

CAN Module

 CAN_ERR_INT    -- CAN bus Error
 CAN_IRX_INT    -- Invalid Received Message
 CAN_RXB0_INT   -- Receive Buffer 0
 CAN_FIFOWM_INT -- FIFO Watermark
 CAN_RXB1_INT   -- Receive Buffer 1 
 CAN_RXBn_INT   -- Any Receive Buffer
 CAN_TXB0_INT   -- Transmit Buffer 0
 CAN_TXB1_INT   -- Transmit Buffer 1
 CAN_TXB2_INT   -- Transmit Buffer 2
 CAN_TXBn_INT   -- Any Transmit Buffer
 CAN_WAKE_INT   -- CAN bus Activity Wake-up